MINISART SYRINGE FILTER 0.2 UM., 50/PKG
Minisart® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12. Type 16541 with a pore size of 0.22 µm can be used for sterile filtration and has a male luer slip outlet. Version K is individually packed and sterilized by ethylene oxide (EO).
Individually packed and sterile Minisart® High Flow syringe filters are optimal for immediate usage whenever sterile filtration or clarification and cell removal under sterile conditions is needed. Due to the slightly asymmetric membrane structure, the PES surface almost behaves like a pre-filter and enables highest flow rates. The low binding membrane is tightly connected with the housing which allows bidirectional use. The housing is made of the acrylic resin MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test.
- Sterile and ready-to-use
- Slightly asymmetric PES with superior flow rate
- Low non-specific binding
- Bidirectional use possible
- PVC-free
| Product properties | |
| Colour | Dark Blue |
| Sterility | Ethylene Oxide |
| Wettability | Hydrophilic |
| Packaging | Single blister packed |
| Primary Product Type | Filtration Devices |
| Brand | Minisart® |
| Connector Outlet | Male Luer Slip |
| Connector Inlet | Female Luer Lock |
| Membrane material | Polyethersulfone (PES) |
| High Flow | Yes |
| Filtration area | 6.2 cm² |
| Diameter | 28 mm |
| Flow rate | 140 mL/min with water at 1 bar (14.5 psi) |
| Pore size | 0.22 µm |
| Technical attributes | |
| Sterilization Method | Ethylene oxide |
| Application | Buffer & Media |
| Area of application | Sterile Filtration |
| Cytotoxicity | According to ISO 10993-5 |
| Biosafety | All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests). |
| Extractables | HPLC certified |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Device typeSyringe Filters | lAcrylic-based multipolymer compound (MBS) |
| Total throughput | Up to 200 mL |
| Device type | Syringe Filters |
| Sample Type | Aqueous` Solvents and harsh liquids according to chemical compatibility |
| pH Range | 3.0 – 12.0 |
| Maximum Pressure | 4.5 bar |
| Operating Pressure | 6 bar (87 psi) |
| Hold-up volume | 100 – 150 µL before bubble point |
| Max. temperature | 60° C |
| Bubble point | Min. value with water 3.2 bar (46 psi) |
| Burst pressure | Min. value 7.0 bar (102 psi) |
| Filter diameter | 28 mm |
| Housing dimensions | 33 × 26 mm |
Minisart® Syringe Filters — The Easy Choice – Clean and Safe Click Here
Laboratory Filtration Products Click Here
Laboratory Filtration Products (US and Canada) Click Here
Minisart® NML | HY | SRP — Sartorius Spritzenvorsatzfilter für die Filtration und Belüftung Click Here
Minisart® Chemical Compatibility Guide Click Here
HPLC-Certificate — Minisart® Syringe Filters for Sample Preparation – reliable and ultrapure Click Here
Related
-
MINISART HIGH-FLOW FILTER, 0.1 UM., 50/PKG
2SRF2-16553 K
-
MINISART RC25 FILTER 0.45 UM, 50/PKG
2SRF2-17765 K
