MINISART RC25 FILTER 0.2 UM, 50/PKG
Minisart® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17764 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
on-sterile Minisart® RC syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The RC membrane is the best option for reliable and leachable free filtration. The very low non-specific binding characteristics of this membrane makes it a perfect choice for aqueous samples and solvents. In addition, unlike PVDF filters, those with RC membranes are suitable for DMSO and other amides, or for ketones, esters, and ethers. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.
- A pouch in one pack for less waste
- Minimum extractables or leachables
- Very low non-specific binding
- Outperforming chemical compatibility
| Product properties | |
| Colour | White (opaque) |
| Filtration area | 4.8 cm² |
| Diameter | 25 mm |
| Flow rate | 80 mL/min with water at 1 bar (14.5 psi) | 160 mL/min with methanol at 1 bar (14.5 psi) |
| Pore size | 0.2 µm |
| Primary Product Type | Filtration Devices |
| Brand | Minisart® |
| Wettability | Hydrophilic |
| High Flow | No |
| Packaging | Bulk pouch packed |
| Membrane material | Regenerated cellulose (RC) |
| Connector Outlet | Male Luer Slip |
| Connector Inlet | Female Luer Lock |
| Sterility | Non-Sterile |
| Technical attributes | |
| Maximum Pressure | 4.5 bar |
| Operating Pressure | 4.5 bar (65 psi) |
| Hold-up volume | 100 – 200 µL before bubble point |
| Max. temperature | 121° C |
| Bubble point | Min. value with water 3.0 bar (44 psi) |
| Burst pressure | Min. value 7.0 bar (102 psi) |
| Filter diameter | 25 mm |
| Housing dimensions | 33 × 24 mm |
| Device type | Syringe Filters |
| Sample Type | Aqueous` Solvents` Harsh liquids according to chemical compatibility |
| Sterilization Procedures | Ethylene oxide` Gamma irradiation` Autoclave, 121°C, 30 min |
| Biosafety | All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests). |
| Extractables | HPLC certified |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Housing material | Polypropylene (PP) |
| Total throughput | Up to 100 mL |
| Application | HPLC` LCMS` ICPMS` Buffer & Media |
| Area of application | Analytical Sample Preparation` Clarification |
| pH Range | 3.0 – 14.0 |
| Sterilization Method | Ethylene oxide` Gamma irradiation` Autoclave |
| Cytotoxicity | According to ISO 10993-5 |
Minisart® Syringe Filters — The Easy Choice – Clean and Safe (US and Canada) Click Here
Laboratory Filtration Products Click Here
Laboratory Filtration Products (US and Canada) Click Here
Minisart® RC Syringe Filters for HPLC Sample Preparation — RC versus PVDF used with Methanol and Acetonitrile Click Here
The Advantages of Minisart® Hydrophilic Syringe Filters for HPLC Sample Preparation Click Here
Minisart® Syringe Filters for HPLC Sample Preparation Click Here
HPLC-Certificate — Minisart® Syringe Filters for Sample Preparation – reliable and ultrapure Click Here
Minisart® Chemical Compatibility Guide Click Here
