STAINLESS STEEL VACUUM FILTER HOLDER 47 MM., 500 ML.
Individual filter holders, stand-alone, to be assembled on vacuum flasks or on manifolds, depending on the particular version. Available in stainless steel, glass or polycarbonate.
Stainless steel vacuum filtration unit for 50/47 mm membrane filter, with 500 ml funnel capacity
Stainless Steel Filter Holders
Stainless steel holders differ in their funnel capacity (choice of 40 ml, 100 ml or 500 ml) and in their valve type (part numbers ending with CS feature sterile venting). They are specifically designed for applications in which particles or microorganisms need to be retained on the surface of membrane filters. Their stainless steel frit filter support ensures uniform distribution of the retained particles over the entire surface of the membrane filter. Special features facilitate the use of these filter holders during routine testing. Their stainless steel taps are easy to turn on and off, and only one hand is needed to use the unique clamp for secure fastening or convenient removal of the funnel.
Glass Filter Holders
These filter holders are available with a 30 ml funnel (filter dia. 25 mm) for small-volume filtration or with a 250 ml funnel (filter dia. 47|50 mm) for large-volume filtration. They can be sterilized by autoclaving (max. 134°C) or by dry heat (max. 180°C). The glass frit ensures uniform distribution of retained particles.
Polycarbonate Filter Holders
Type 16510 is complete with a receiver flask, and can be used with vacuum or low pressure (0.5 bar|7.3 psi is recommended for maximum throughput). Type 16511 is the same as 16510, but without a receiver flask. It is designed for use on a suction flask or a vacuum manifold (e.g. Combisart® systems). Both types can be sterilized by autoclaving (max. 121°C).
| Product properties | |
| Filtration area | 12.5 cm² |
| Diameter | 47 mm / 50 mm |
| Max. operating pressure | 2 bar |
| Number of Filter Holders | 1 |
| Primary Product TypeFilter Holders | Filter Holders |
| Material | Stainless Steel |
| Collecting Vessel | No |
| Material Filter Support | Stainless steel frit |
| Usage | Reusable |
| Technical attributes | |
| Funnel capacity | 500 mL |
| Suitable membrane filter diameter | 47 / 50 mm |
| Sterilization Procedures | By autoclaving (max. 134 °C)` By dry heat (max. 180 °C)` By flaming` By other methods acc. to ISO 8199 |
| Stainless steel quality | High-grade stainless steel=== B.S. 304S31|AISI 304 |
| Parts and materials | Lid, funnel, base part, filter support, clamp and tap made of stainless steel; silicone flat gasket, silicone lid seal |
| Application | Microbial Enumeration |
| Market | Food & Beverage` Environmental/Water Testing |
| Outlet | (for branches only) Hose nipple, DN 10 |
| Outlet spouts (individual system) | 10 mm outside diameter |
Related
-
COMBISART UNIVERSAL FILTER 6-P MANIFOLD
2SRF3-16843
-
PTFE SYRINGE FILTER HOLDER 13 MM.
2SRF3-16574
-
GLASS FILTER HOLDER W/130 ML CAPACITY
2SRF3-16523
-
POLYCARBONATE SYRINGE FILTER HOLDER 25 MM., 12/PKG
2SRF3-16517 E
-
P.C. SYRINGE FILTER HOLDER 13 MM, 12/PKG
2SRF3-16514 E
-
GLASS VACUUM FILTER HOLDER W/SUPPORT
2SRF3-16316
-
GLASS VACUUM FILTER HOLDER 25 MM.
2SRF3-16315
-
25 MM. GLASS HOLDER W/GLASS FRIT
2SRF3-16306
-
STAINLESS STEEL VACUUM FILTRATION W/100 ML FUNNEL
2SRF3-16219
-
STAINLESS STEEL SYRINGE FILTER HOLDER 25 MM.
2SRF3-16214
-
FILTER HOLDER 47 MM. W/RECEIVER FLASK
2SRF3-16510
-
ALL-GLASS VACUUM FILTRATION UNIT
2SRF3-16309
-
GLASS VACUUM FILTRATION HOLDER
2SRF3-16307
-
COMBISART 3-BRANCH MANIFOLD FILTER
2SRF3-16842
