VIVAFLOW 200, 3,000 MWCO PES, 2/PKG

VIVOFLOW 200, 3,000 MWCO PES, 2/PKG


Cat. No. : 2SRVS-VF20P9
Brand : : Sartorius Lab Instruments




0.5 - 5 l

  • Plug and play laboratory cross flow cassette
  • Re-usable
  • Optimal for cell culture supernatant and virus concentration
  • High flow rate and recovery
  • Vivaflow® 200 is a ready to use and reusable laboratory crossflow cassette for concentrating up to 5 l samples. The membrane surface per device is 200 cm². One unit comes with all necessary accessories for running the device with a laboratory pump and a size 16 pump head. For speeding up the concentration, two cassettes can be run simultaneously.

    Vivaflow® 200 is optimally suited for applications like cell culture supernatant concentration, virus concentration and water concentration e.g. in fish breeding facilities. This economical product offers a standard of ease of use, reliability and flexibility unrivalled by any laboratory filtration system in the market. The thin-channel, flip-flow recirculation path of the modules provides high crossflow velocities with minimum pump speed requirements. A single 200 cm2 module typically concentrates 1 l by a factor of 50 in less than 30 min. Alternatively, two Vivaflow® 200 modules can be used in parallel for concentration of 5 l in under 75 minutes. Near total recovery of the concentrate is achieved with a single final rinse. Vivaflow® 200 can be easily cleaned and re-used several times. All accessories for sample concentration, except a peristaltic pump with a pump head for size 16 tubing, are included in the package for using a single cassette. A 500 ml sealed diafiltration reservoir can be added to the system for rapid and convenient buffer exchange.

    Equipment required

    The standard Vivaflow® 200 package comes with tubing, pressure indicator, flow restrictor and high pressure pump tubing. All you need is a peristaltic pump with a pump head capable of handling 6.4 mm OD tubing (size 16).

    Equipment required

    The standard Vivaflow® 200 package comes with tubing, pressure indicator, flow restrictor and high pressure pump tubing. All you need is a peristaltic pump with a pump head capable of handling 6.4 mm OD tubing (size 16).

    Running 2 Vivaflow® 200 cassettes in parallel

    For speeding up the concentration, two Vivaflow® 200 cassettes can easily be connected using a Y connector which is preassembeled with the correct tubing sizes and fittings (size 16 tubing for connecting the two Vivaflow® 200 units, size 15 tubing for the pump). Please note that you need a size 15 pump head for running 2 Vivaflows® in parallel.

    • High flow rate and recovery
    • Clear housing for process monitoring
    • Ready to use single cassettes
    • Easy set up of 2 cassettes for use in parallel
    • Re-usable product

    Performance Characteristics

      Time to concentrate up to 20x (min.) at 3 bar
    inlet pressure, 20°C
      Start volume Average flux Recovery %  
      1 litre ml/min Direct 25 ml rinse
    Lysozyme 0.25 mg/ml (14,000 MW)
    2,000 MWCO Hydrosart 160 6 97 % >99 %
    3,000 MWCO PES 180 5 97 % >99 %
    BSA 1.0 mg/ml (66,000 MW)
    5,000 MWCO PES 29 33 98 % >99 %
    5,000 MWCO Hydrosart 70 14 98 % >99 %
    10,000 MWCO PES 23 41 96 % >99 %
    10,000 MWCO Hydrosart 35 27 98 % >99 %
    30,000 MWCO PES 25 38 96 % 99 %
    30,000 MWCO Hydrosart 20 48 96 % >99 %
    50,000 MWCO PES 22 43 96 % 98 %
    γ Globulins 1.0 mg/ml (average 160,000 MW)
    100,000 MWCO PES 54 18 96 % 99 %
    100,000 MWCO RC 45 21 96 % 99 %
    Yeast 1.0 mg/ml (S. Cerevisiae)
    0.2 μm PES 11 86 92 % 98 %
    Dilute solute concentration, start volume 1 litre at 3 bar, 10,000 MWCO PES
    BSA 0.001 mg/ml 18 52 90 % 98 %
    BSA 0.01 mg/ml 20 47 92 % 98 %
    BSA 0.1 mg/ml 21 45 94 % 99 %
    Start volume 5 litres (two VF200 in parallel at 3 bar) 10,000 MWCO PES
    BSA 1.0 mg/ml (66,000 MW) 67 70 97 % >99 %
Product properties  
MWCO 3,000 Daltons
Width 38 mm
Volume Range 500 – 5,000 mL
Max. operating pressure 4 bar
Primary Product Type Ultrafiltration Devices
Membrane material Polyethersulfone (PES)
Membrane Polyethersulfone (PES)
Tubing PVC (medical grade)
Material o-ring | seal Silicone (SI)
Technical attributes  
Electrical / battery item false
Housing material Acrylic
Pressure indicator Polypropylene, SS spring
Flow Channel Acrylic
Flow Restrictor Polypropylene (PP)
Maximum Pressure 4 bar
Overall length 127 mm
Hold-up volume 5.3 mL
Active Membrane Area 200 cm²
Overall height 138 mm
Max. temperature 60° C
Non-recoverable Hold-up < 2 mL
Channel width 10 mm
Minimum Recirculation Volume < 20 mL
Channel height 0.4 mm
Pump Flow 200 – 400 mL/min
Application Protein Concentration
Area of application Buffer Exchange` Protein/DNA Concentration
MarketResearch Research
Device typeTangential / Crossflow Concentrator Tangential / Crossflow Concentrator
Sample TypeProtein` Peptide` Nanoparticles Protein` Peptide` Nanoparticles
FittingsNylon (NY) Nylon (NY)
Membrane support Polypropylene (PP)

Ultrafiltration Family Click Here

Laboratory Filtration Products Click Here 

Laboratory Filtration Products (US and Canada) Click Here

Vivaflow 50 | 50R | 200 Click Here

X